Gotham HPEPP Bedienungsanleitung PDF herunterladen (Seite 3)

HPEPP

Wiring Diagram

Installation Steps

1. Mount through a ½” KO in luminaire or junction box. Secure with lock nut

2. Connect line voltage wires within enclosure or junction box as shown (120 or 277VAC only)

Relay rated to 800W max @120V, 1200W max @ 277V

3. Connect Class 2 dimming wires (0-10V) to the ballast/driver (maximum 20mA)

4. Connect Class 2 DMX signal via RJ-45 port using CAT-5 cables. DMX CAT-5 Pin Out:

Note: Programming button is located at the end of the HPEPP near the CAT-5 DMX Input.

Note: CAT-5, CAT-5e and CAT-6 cabling are acceptable

DMX Network Cat-5 / Cat-5e / Cat 6 Wiring

Pin (Wire) # Wire Color

DMX512 Function per ANSI E1.11

Used in HPEPP

1 white / orange Data 1 +

2 orange

Data 1 -

3 white / green Data 2 + (optional)

blue Not Assigned

5 white / blue Not Assigned

6 green

Data 2 - (optional)

7 white / brown Data 1 common (0 v)

8 brown Data 2 common (0 v)

HPEPP

CAT-5 DMX In

CAT-5 DMX

0-10V Driver/Ballast

BLACK

BLUE

GRAY (-)

VIOLET (+)

WHIT

BLUE

1 2 3 4 5 6 7 8

Keine Kommentare

Gotham HPEPP Bedienungsanleitung Seite 3